Modern design paired with perfect technology. That’s the new CS 550 of the brand Dual. The chassis is laquered with a special antistatic laquer in a timeless anthracite colour. The solid MDF chassis has a high rigidity and a low natural resonance. Vibrations, like for example impact noise, will be eliminated before they reach the platter and the motor. The high-class tonearm is only used on the top models CS 550 and CS 600 and was developed just for those turntables. The special hardened 7mm platter axle is turning almost frictionsless in the precise bearing made of brass. The platter is a heavy triple damped sandwich-platter with two damping rings. Additional it is effused with an special damping mass. This minimizes the natural resonance and improves, due to the heavy weight, the speed accuracy. To avoid any bad influences to the sound, we disclaimed on any kind of automatic function. Tonearm technology: The height-adjustable arm has a quadruple ball bearing Cardan joint and a particulary torsioinally rigid headshell mad of carbon fibre with ½“ mounting holes. Counterweight and antiskating are adjustable. Chassis technology: Vibration damping solid wood chassis. Heavy aluminium sandwich platter is weighted with copper rings and a cast damping mass is also located within the interior. The brass bearing is build for longlife and has a bearing mirror made of teflon. Drive technology: The platter is driven by a precision flat belt and a DC motor with electronic speed control. Cartridge is not included. Technical Specifications Speed in rpm: 33/45 Speed accuracy: +/- 0,05% Rumple unweighted signal-to-noise ratio: 53dB Rumple weighted signal-to-noise ratio: 75dB Connections: 1 x RCA Stereo Socket, 1 x Ground Socket Dimensions (WxHxD): 440 x 119 x 370mm Weight: 7.00 kg Colour: Anthracite Metalic Power supply: 12V DC, 150mA
The CS 415 is the entry turntable into the "world" of Dual. It brings all virtues of the craftmanship "Made in Germany" from the Black Forrest. The almost floating tonearm with its perfect bearing provides an optimal running on the record. The platter bearing and the platter axle are precision manufactured parts from Germany and enable a smooth drive of the platter. The traditional belt-drive technology supports a good drive accuracy and uncouple the platter and the motor. Of course, this DUAL is fully-automatic for the highest comfort and enjoyment of your beloved records. Tonearm technology: Weight balanced tone arm. Pre-set tracking force and anti-skating. Headshell with 13mm (1/2-inch) - fixing-holes. Torsion headshell. Chassis technology: Vibration damping wooden chassis. Aluminium platter with antistatic felt mat. Drive technology: Belt drive with polished flat belt. Electronically controlled DC motor. Viscosity-damped arm lift. Automatic tone arm cue. Auto Stop with tone arm return. Supplied with magnetic Audio Technica AT-91.
הפטיפון דואל דגם CS-455-1 הינו "האח הגדול" של הפטיפון דגם CS-435, ההבדל ניכר באיכות הזרוע ובפלטה כבדה יותר. שני היבטים אלה נותנים לפטיפון יציבות גדולה יותר, ומונעות ויברציות בסיבוב הפלטה ובקריאת התקליטים. The drive through a precision rubber belt eliminates further vibrations, which could be caused by the motor and could be transmitted through the platter to the cartridge. That's why the belt drive is the best kind of drive for a hifi turntable. Additional the CS 455-1 gives you the possibility to play grammophone records with 78 r/min. Thereofre you only have to change the needle. For the best ease of use the proven full-automatic system of the Black Forrest is built-in Cardan bearing with zero-mass tracking force setting, thanks to precision torsion spring. Detachable headshell with 13mm (1/2-inch) fixing-holes. Adjustable tracking force and anti-skating. Extremely rigid headshell made of carbon fiber. Chassis technology: Solid wooden chassis. Floating sub chassis. Vibration damping aluminium platter with antistatic felt mat. Drive technology: Belt drive with polished flat belt. DC motor with electronic speed control. Viscosity-damped arm lift. Automatic tone arm cue. Auto Stop with tone arm return. Playback option for archive disks with 78 rpm speed. Delivered with OM 10 cartridge. * Also available with built-in phono preamplifier נתונים טכניים Speed r/min.: 33/45/78 Speed accuracy: -/+ 0,07 % Rumple unweighted signal-to-noise ratio: 48 dB Rumple weighted signal-to-noise ratio: 72 dB Cartridge system: Ortofon OM 10 Frequency Response: 20 Hz - 22 kHz Depth sensing capability (300 Hz): 70 µm at 315 Hz Connections: 1 x RCA Stereo Cable, 1 x Ground Cable Dimensions (WxHxD): 420 x 133 x 360 mm Weight: 5,43 kg Colour: Black (Silver finish or Gold finish) / Silver Power supply: 12V DC, 150 mA
פטיפון יוצא מן הכלל הינו הפטיפון האוטומטי דגם DUAL CS-435-1. אוטומטי לחלוטין שיכול להגיע בגרסה הכולל קדם מגבר בתוכו. פשוט להתקנה. רק לחבר אותו למגבר. הזרוע שלו מאפשרת שדרוג על ידי החלפת הראש. הפטיפון המיוצר בגרמניה, מדוייק ובנוי לשמוש לשנים רבות. הזרוע של הפטיפון הזה, מאוזנת וניתנת לכיוונון של המשקל על מנת למנוע החלקה שלה על התקליטים. הראש ניתן להחלפה ושדרוג. הראש המותקן בפטיפון הינו אודיו טכניקה דגם AT-91. בסיס הפטיפון עשוי עץ, הצלחת עשויה באלומיניום עם משטח אנטיסטטי. הפטיפון דגם CS-435-1 הינו פטיפון אוטומטי בעל מנוע DC המונע על ידי רצועה. הזרוע חוזרת למקומה עם סיום התקליט.
The well-proven fully automatic technology was redesigned here. Through the use of new materials and manufacturing methods the performance of the turntables, which are Made in Germany, was improved. Tonearm technology: A new development, the Dual E(asy)motion tonearm wire ensures a unresistant movement of the tonearm and a better sound performance. The cardan bearing of the tonearm was also improved. The massless tracking force adjustment is done by a high precission torsion spring. The warp resistant and exchangeable headshell is made of carbon and suitbable for cartridges with 1/2" fixing. Chassis technology: The solid wooden chassis, made of MDF, absorbs in combination with the floating subchassis all kinds of vibration and impact noise. The completely new designed chassis serves only one thing - the improvement of the sound. Included in delivery is the MM cartridge Audio Technica AT-91E. Drive technology: Belt driven by a precision flat belt. DC motor with electronic speed control. Special hardened 7mm axle. Cartridge Ortofon OM 10 is included.
Semi-automatic turntable with newly developed auto-stop function. The special thing on this, the auto-stop function is electronic controlled, not by a mechanic. So it has no influence on the sound quality of the turntable. The solid chassis of the CS 526 comes from the CS 550, but here in black colour. Also the motor unit and the bearing are comming from the bigger brother. For the scanning we use the proven tonearm of the CS 505-4. The tracking force can be adjusted precise by a torsion spring. The antiskating force can be adjusted for cone-shaped needles or spherical-shaped needles individually. Therefore the CS 526 gives a lot of possibilities to use different cartridges. For protection of the tonearm and the chassis, a dustcover is included. Tonearm technology: Cardan bearing with massless stylus force set by a high-precision torsion spring. Rigid headshell made of carbon fiber with ½-inch fixing-holes. Adjustable tracking force and anti-skating. Viscosity damped tonearm lift. Chassis technology: Vibration damping solid wood chassis. Vibration damped aluminium platter with anti-static, thick felt mat. Drive technology: Belt driven by a precision flat belt. DC motor with electronic speed control. Special hardened 7mm axle. Cartridge Ortofon OM 10 is include Technical Specifications Speed r/min.: 33/45 Speed accuracy: +/- 0,06% Rumple unweightet signal-to-noise ratio: 48dB Rumple weighted signal-to-noise: 72dB Cartridge system: Ortofon OM 10 Frequency Response: 20 Hz - 22 kHz Connectors: 1 x RCA Stereo Socket, 1 x Ground Socket Dimensions (BxHxT): 440x119x370 mm Weight: 6,7kg Colour: Black Power supply: 12 V DC
