ראש לפטיפון - Glider - בנץ מיקרו


The Benz Glider is the hand built Swiss made moving coil cartridge distinguished by its open, free floating design, smooth response curve, and affordable price. Built upon a solid aluminum base, the moving coil cantilever assembly id free of body resonances. The Benz iron cross coil, generates the universal output level of 1.00mV, ideal for either MM or MC phono preamps. The Glider shares many qualities with the Benz wood body cartridge including micro-line stylus with face bonded shank, tapped mounting holes, and special generator damping materials. The glider`s overall weight of 6.5 grams and medium compliance allows excellent performance on most tonearms.



קרא עוד


SETUP INSTRUCTIONS

 

 

1,000-47,000 ohms

Recommended loading

2-2.5 grams

Recommended tracing force

2.1-2.2

Optimum tracing force

22 degrees (rear of cartridge slightly down)

Vertical tracking angle (VAT)

Medium

Recommended tone arm mass

23ºC

Optimum working temperature

40 hours

Break in period

 

 

 

SPECIFICATIONS

נתונים טכניים:

 

 

Physical

Aluminum, open, free-floating

Body

Solid boron rod: 0.28mm diameter

Cantilever

Nude micro-edge diamond

Stylus

4um/80um

Stylus tip radius

Cross Coil

Coil

6.5 grams

Weight

 

 

 

Electrical

1.00mV at 1,000 Hz

Output voltage

38 ohm

Internal impedance

10-50,000 Hz

Frequency response

Better than 1 dB

Channel balance

Better than 40dB at 1,000 kHz/

Channel separation

Better than 30dB at 10,000 Hz

 

 

 

 

Dynamic

 

Tracing ability at 315 Hz

>80um

At a tracing force of 2 grams

15um/mN

Dynamic compliance